IP65 10KW Hybrid Solar Inverter Low Voltage 3 Phase Three Phase Inverter 10KVA 12KW Onduleur Solaire Hybride Solar System
Description


Model |
WTHD-HI-3P-10KL |
WTHD-HI-3P-12KL |
|||
PV String Input |
|||||
Max. DC Input Power (W) |
13000 |
15,600 |
|||
Rated PV Input Voltage (V) |
550 160-800 |
||||
Start-up Voltage (V) |
160 |
||||
MPPT Voltage Range (V) |
200-650 |
||||
Full Load MPPT Voltage Range (V) |
350-650 |
||||
Max. DC Input Current(A) |
26+13 |
||||
Max. DC Short Circuit Current(A) |
34+17 |
||||
No. of MPPT Trackers |
2 |
||||
No. of Strings per MPPT Tracker |
2+1 |
||||
AC Input/Output Data |
|||||
Rated AC Output Power (W) |
10000 |
12,000 |
|||
Max AC Output Power (W) |
11000 |
13,200 |
|||
AC Input/Output Rated Current(A) |
15.2/14.5 |
18.2/17.4 |
|||
Max. AC Input/Output Current(A) |
16.7/15.9 |
20/19.1 |
|||
Max. Three-phase Unbalanced Output Current(A) |
22.7/21.7 |
27.3/26.1 |
|||
Max Output short circuit current (A) |
65 |
||||
Max. Continuous AC Passthrough(A) |
45 |
||||
Peak Power (off grid) |
2 times of rated power, 10 S |
||||
Power Factor |
0.8 leading - 0.8 lagging |
||||
Output Frequency and Voltage |
50/60Hz; 3L/N/PE 220/380Vac, 230/400Vac |
||||
Grid Type |
Three Phase |
||||
Total Harmonic Distortion (THDi) |
<3%<>
|
||||
DC Current Injection |
<0.5% ln="">
|
||||
Battery |
|||||
Battery Type |
Lead-acid or Lithium-ion |
||||
Battery Voltage Range (V) |
40-60 |
||||
Max. Charging Current (A) |
210 |
||||
Max. Discharging Current (A) |
210 |
||||
External Temperature Sensor |
Yes |
||||
Charging Curve |
3 Stages / Equalization |
||||
Charging Strategy for Li-Ion Battery |
Self-adaption to BMS |
||||
fficiency |
|||||
Max. Efficiency |
97.60% |
||||
Euro Efficiency |
97.00% |
||||
MPPT Efficiency |
99.00% |
||||
Protection |
|||||
Anti-islanding Protection |
Yes
|
||||
PV String Input Reverse Polarity |
|||||
Insulation Resistor Detection |
|||||
Residual Current Monitoring Unit |
|||||
Output Over Current Protection |
|||||
Output Shorted Protection |
|||||
Output overvoltage protection |
|||||
Photovoltaic input lightning |
|||||
Surge Protection |
DC Type III / AC Type III |
||||
Over Voltage Category |
DC Type II/AC Type III |
||||
Certifications and Standards |
|||||
Grid Regulation |
IEC61727/62116, EN50549-1 |
||||
Safety EMC / Standard |
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |
||||
General Data |
|||||
Operating Temperature Range (℃) |
-40-60℃, >45℃ Derating |
||||
Cooling |
Smart Cooling |
||||
Noise (dB) |
≤50 dB |
||||
Communication to BMS |
RS485; CAN |
||||
Monitoring mode |
Wi-Fi+APP |
||||
Weight (kg) |
3400.00% |
||||
Size (W x H x D mm) |
440W×680H×255D Excluding Connectors and Brackets |
||||
Ingress Protection |
IP66 |
||||
Installation Style |
Wall-mounted |
||||
Warranty |
5 Years 10 Years Optional |
||||








●Full Power Product Range: Including UPS, EPS, and voltage stabilizers
We can provide OEM and ODM customization services according to customers' requirements







Q1: Are you a factory or a trading company
A: We are a manufacturing factory, we focus on OEM and ODM
Q2: What kind of certification do you have
---ISO9000, ISO14001, CE, ROHS, Thiel, etcQ3: Product coverage and industries:---Solar inverter、Lead-acid batteries、lithium battery、Solar generator、Solar panels
Q4: About the battery
Provide one-stop battery solutions; lead-acid and lithium batteries are available
Q5: Do you accept OEM/ODM
Yes, the entire series supports ODM/OEM, and the minimum order quantity is flexible; +
Q6: About warranty ---The warranty period is 1 to 3 years, and the battery warranty is 1 to 3 years; differentiate between different products and models;Q7: Can I participate in bidding projects
We support large-scale project bidding, authorized manufacturing, project design, and more
Q8: Are there overseas branches
Currently, the Southeast Asia Division, the Eastern Europe Serbia Division, and the Middle East Division are set up
WTHD presents the IP65 10KW Hybrid Solar Inverter Low Voltage 3 Phase Three Phase Inverter 10KVA 12KW Onduleur Solaire Hybride Solar System — a robust, efficient, and versatile hybrid solar inverter engineered to meet the demands of modern distributed generation, off-grid resilience, and critical backup power. Combining industrial-grade protection, three-phase capability, and advanced hybrid controls, this hybrid solar inverter delivers reliable, high-performance energy conversion for residential, commercial, and light industrial applications. As a flagship product from Shenzhen Weitu Hongda Industrial Co., Ltd. (WTHD), this IP65 3-phase inverter represents years of R&D and quality manufacturing aligned with global certifications and tailored power solutions
Product Overview and Core Features
The WTHD IP65 10KW hybrid solar inverter is designed to be a central component in a low voltage solar system with both grid-tie and off-grid functionality. This hybrid solar inverter supports photovoltaic array input, battery storage integration, and utility interaction across three-phase circuits. The IP65-rated enclosure provides dust-tight and water-resistant protection for outdoor or harsh-environment installations, making it suitable for rooftop, canopy, and containerized energy systems. As a true 10kW off-grid inverter in nominal rating and a flexible 10kVA/12kW surge capability, this unit balances continuous power delivery with transient load handling for motors, compressors, and large inductive devices
Technical Advantages and Innovation
- Hybrid Energy Management: This hybrid solar inverter integrates MPPT-controlled PV input, bidirectional battery charging/discharging, and programmable grid interaction. The intelligent hybrid controller optimizes solar utilization and battery SOC, enabling peak shaving, load shifting, and seamless transition between grid, battery, and solar sources
- Three-Phase Low Voltage Design: Specifically engineered for low voltage solar systems, the IP65 3-phase inverter supports balanced and unbalanced loads, enabling stable power across L1, L2, L3 phases. This design is ideal for small commercial sites, light industrial plants, and multi-phase residential setups seeking efficient three-phase distribution
- Advanced MPPT and Efficiency: Multiple maximum power point tracking channels ensure fast, accurate PV harvesting under partial shading or variable irradiance. The internal power electronics feature high-efficiency conversion stages that reduce thermal losses and extend battery life. The hybrid solar inverter’s high conversion efficiency lowers system LCOE and improves overall return on investment
- Robust Outdoor Protection: The IP65-rated housing and corrosion-resistant finish permit outdoor installation near PV arrays, reducing cable runs and system complexity. With ingress protection against dust and jets of water, the IP65 3-phase inverter remains operational in challenging climates, from coastal installations to arid rooftop environments
- Grid and Off-Grid Flexibility: The unit can function as a grid-tied inverter with battery backup or a 10kW off-grid inverter, enabling continuous power during grid outages. Advanced grid-following and grid-forming modes permit safe export control, anti-islanding protection, and smooth transition to backup power, ensuring critical loads remain energized
- Scalable and Modular: Designed for easy parallel operation and system scalability, multiple hybrid solar inverter units can be deployed for larger installations. The modular approach simplifies maintenance and allows phased expansion of energy storage and PV capacity without major system redesign
Applications and Use Cases
- Commercial Rooftops and Small Businesses: The IP65 3-phase inverter supports three-phase distribution for shops, restaurants, and commercial buildings seeking energy cost reduction and backup power. It enables demand charge management and peak shaving strategies, helping businesses lower operating expense
- Off-Grid Villages and Remote Sites: As a reliable 10kW off-grid inverter, the hybrid solar inverter provides primary power in remote communities and construction sites where grid access is unavailable or unreliable. Coupled with battery banks, it enables multi-day autonomy and integration with diesel gen-sets for hybrid operation
- Industrial and Light Manufacturing: Small factories and workshops with motor loads benefit from the three-phase output and surge capacity. The hybrid solar inverter delivers stable voltage and frequency under heavy startup conditions, protecting sensitive machinery and production lines
- Telecom Towers and Edge Infrastructure: Telecom and remote monitoring installations require reliable backup power and outdoor-ready enclosures. The IP65 rating and hybrid capabilities make the unit ideal for telecom, SCADA sites, and emergency power systems
- Medical and Critical Facilities: Hospitals, clinics, and emergency centers can deploy the hybrid solar inverter for uninterruptible power and energy resilience. Seamless transfer and precise voltage control ensure life-support and essential systems remain operational during outages
Performance and Safety
WTHD’s hybrid solar inverter includes comprehensive protections such as over/under voltage, over/under frequency, short-circuit protection, anti-islanding, and battery management safeguards. The low voltage solar system compatibility and advanced BMS interfaces protect battery longevity by managing charge cycles and thermal behavior. Conformance to industry certifications and internal quality controls—stemming from WTHD’s ISO9001/14001/45001 suite and relevant CE/FCC/Taier approvals—assures installers and end-users of reliable performance and regulatory compliance
Installation and Monitoring
The IP65 10KW hybrid solar inverter is designed for streamlined installation. Its outdoor-rated enclosure reduces the need for additional environmental housing, while the unit’s user-friendly wiring terminals and clear labeling support rapid commissioning. Integrated communication protocols (CAN, RS485, Ethernet options) enable remote monitoring and system integration into BMS or energy management platforms. The inverter’s display and optional cloud portals grant real-time visibility into PV production, battery state-of-charge, load distribution, and historical performance metrics, improving system diagnostics and uptime
Why Choose WTHD
Shenzhen Weitu Hongda Industrial Co., Ltd. leverages over a decade of expertise in power electronics, backup systems, and renewable integration. With proprietary UPS patents and a commitment to one-stop customized power solutions, WTHD delivers products engineered for durability, safety, and operational efficiency. The IP65 3-phase inverter reflects this dedication through quality components, rigorous factory testing, and global compliance standards
Key Benefits at a Glance
- Versatile hybrid solar inverter for grid-tied and off-grid installations
- Robust IP65-rated enclosure for outdoor deployment
- Three-phase low voltage design suitable for commercial and industrial loads
- Multiple MPPT channels and high conversion efficiency for maximum energy yield
- Comprehensive battery integration and BMS compatibility for optimized storage use
- Scalable architecture for larger systems and parallel operation
- Advanced protections and certified quality for safe, reliable operation
The WTHD IP65 10KW Hybrid Solar Inverter Low Voltage 3 Phase Three Phase Inverter 10KVA 12KW Onduleur Solaire Hybride Solar System is a high-performance hybrid solar inverter tailored for demanding environments and diverse application scenarios. It merges robust outdoor protection, sophisticated energy management, and three-phase reliability into a single low voltage solar system solution. For businesses and installers seeking a resilient 10kW off-grid inverter with hybrid functionality and industrial-grade durability, WTHD’s offering provides a compelling balance of performance, flexibility, and proven engineering pedigree