IP65 Hybrid Solar Inverter 10KW on Off Grid 10000W Onduleur Solaire Hybride Inversor Solar Hibrido Single Phase Hybrid Inverter
Description


Model |
WTHD-HI-1P-10KL |
|
Battery Input Data |
||
Battery Type |
Lead-acid or Lithium-ion |
|
Battery Voltage Range(V) |
40-60 |
|
Max. Charging Current(A) |
210 |
|
Max. Discharging Current(A) |
210 |
|
Charging Strategy for Li-Ion Battery |
Self-adaption to BMS |
|
Number of Battery Input |
1 |
|
PV String Input Data |
||
Max. PV access Power(W) |
20000 |
|
Max. PV Input Power(W) |
16000 |
|
Max. PV Input Voltage(V) |
500 |
|
Start-up Voltage(V) |
125 |
|
PV Input Voltage Range(V) |
125-500 |
|
MPPT Voltage Range(V) |
150~425 |
|
Full Load MPPT Voltage Range(V) |
200~425 |
|
Rated PV Input Voltage(V) |
370 |
|
Max. Operating PV Input Current(A) |
32+32 |
|
Max. Input Short-Circuit Current(A) |
48+48 |
|
No. of MPP Trackers/No. of Strings MPP Tracker |
2/2+2 |
|
Max. Inverter Backfeed Current to The Array |
0 |
|
AC Input Data |
||
Rated AC Input Active Power(W) |
10000 |
|
Max. AC Input Active Power(W) |
11000 |
|
Peak Power(off grid)(W) |
2 times of rated power, 10s |
|
Rated AC Input/Output Current(A) |
45.5/43.5 |
|
Max. Rated AC Input/Output Current(A) |
50/47.9 |
|
Max. Continuous AC Passthrough(grid to load)(A) |
50 |
|
Max. Output Fault Current(A) |
100 |
|
Max. Output Overcurrent Protection(A) |
140 |
|
Rated Input Voltage/Range(V) |
220V/230V 0.85Un-1.1Un |
|
Grid Connection Form |
L+N+PE |
|
Rated Input Grid Frequency/Range |
50Hz/45Hz-55Hz 60Hz/55Hz-65Hz |
|
Power Factor Adjustment Range |
0.8 leading-0.8 lagging |
|
Total Harmonic Distortion THDi |
<3%>
|
|
DC Injection Current |
<0.5% ln="">
|
|
Efficiency |
||
Max. Efficiency |
0.976 |
|
Euro Efficiency |
0.965 |
|
MPPT Efficiency |
>99% |
|
Equipment Protection |
||
DC Polarity Reverse Connection Protection |
Yes |
|
AC Output Overcurrent Protection |
Yes |
|
AC Output Overvoltage Protection |
Yes |
|
AC Output Short CircuitProtection |
Yes |
|
Thermal Protection |
Yes |
|
DC Terminal Insulation Impedance Monitoring |
Yes |
|
DC Component Monitoring |
Yes |
|
Ground Fault Current Monitoring |
Yes |
|
Arc fault circuit interrupter AFCI |
Optional |
|
Power Network Monitoring |
Yes |
|
Island Protection Monitoring |
Yes |
|
Earth Fault Detection |
Yes |
|
DC Input Switch |
Yes |
|
Overvoltage Load Drop Protection |
Yes |
|
Residual Current RCD Detection |
Yes |
|
Surge Protection Level |
Type II DC / Type II AC |
|
Interfac |
||
Display |
LCD+LED |
|
Communicaion Interface |
RS232, RS485, CAN |
|
Monitor Mode |
GPRS/WIFI/Bluetooth/4G/LAN |
|
General Da |
||
Operating Temperature Range |
-40 to +60℃, >45℃ Derating |
|
Permissible Ambient Humidity |
0-100% |
|
Permissible Alitude |
2000m |
|
Noise dB |
<30 db="">
|
|
Ingress Protection(IP) Rating |
IP 66 |
|
Inverter Topology |
Non-Isolated |
|
Over Voltage Category |
OVC II DC, OVC III AC |
|
Weight(kg) |
25 |
|
Cabinet size(mm) W×H×D Excluding connectors and brackets |
340×580×238 |
|
Warranty |
Standard 5 years, extended warranty |
|
Type of Cooling |
Intelligent Air Cooling |
|
Grid Regulation |
IEC 61727, IEC 62116, EN 50549 |
|
Safety EMC/Standard |
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |
|









●Full Power Product Range: Including UPS, EPS, and voltage stabilizers
We can provide OEM and ODM customization services according to customers' requirements







Q1: Are you a factory or a trading company
A: We are a manufacturing factory, we focus on OEM and ODM
Q2: What kind of certification do you have
---ISO9000, ISO14001, CE, ROHS, Thiel, etcQ3: Product coverage and industries:---Solar inverter、Lead-acid batteries、lithium battery、Solar generator、Solar panels
Q4: About the battery
Provide one-stop battery solutions; lead-acid and lithium batteries are available
Q5: Do you accept OEM/ODM
Yes, the entire series supports ODM/OEM, and the minimum order quantity is flexible;
Q6: About warranty ---The warranty period is 1 to 3 years, and the battery warranty is 1 to 3 years; differentiate between different products and models;Q7: Can I participate in bidding projects
We support large-scale project bidding, authorized manufacturing, project design, and more
Q8: Are there overseas branches
Currently, the Southeast Asia Division, the Eastern Europe Serbia Division, and the Middle East Division are set up
WTHD presents the IP65 Hybrid Solar Inverter 10KW — a robust, versatile, and industry-ready power solution designed to meet the demanding needs of modern residential, commercial, and remote applications. As an advanced hybrid solar inverter 10KW engineered for resilience and performance, the IP65 off-grid inverter brings together seamless solar integration, reliable battery management, and rugged environmental protection. The single phase solar inverter design ensures compatibility with common distribution systems, and the 10000W Onduleur solaire hybrid capacity makes it a compelling choice for users who require consistent power delivery, high efficiency, and durable build quality
Product Overview and Core Capabilities
The hybrid solar inverter 10KW offered by WTHD is a single phase solar inverter optimized for hybrid and off-grid configurations. This IP65 off-grid inverter is rated for 10000W and is designed to perform reliably in challenging outdoor and indoor settings. As an IP65 enclosure product, the unit resists dust ingress and low-pressure water jets, making the hybrid solar inverter 10KW suitable for rooftop installations, remote off-grid sites, and industrial settings where weather exposure is a concern. The single phase solar inverter topology gives installers flexibility to integrate with existing single-phase distribution networks while leveraging solar generation and battery storage
Primary Features
- True hybrid capability: The hybrid solar inverter 10KW supports simultaneous solar PV input, battery storage, and utility interaction. It enables smart energy flow control to prioritize solar consumption, battery charging, and grid interaction as required
- Rugged IP65-rated design: The IP65 off-grid inverter provides strong environmental protection, ensuring longevity and reduced maintenance in dusty, wet, or outdoor locations
- 10000W continuous output: As a 10000W Onduleur solaire hybrid, this inverter handles full-load single-phase distribution with stable output for critical loads, ensuring sensitive equipment runs smoothly
- High efficiency and MPPT: Integrated maximum power point tracking (MPPT) optimizes PV array performance. The hybrid solar inverter 10KW achieves high conversion efficiency to maximize solar harvest and lower level energy costs
- Advanced battery management: Designed for multiple battery types and chemistries, the unit offers configurable charge/discharge parameters, state-of-charge monitoring, and lifespan-preserving algorithms for hybrid and off-grid use
- Multi-mode operation: The single phase solar inverter supports on-grid, off-grid, and backup modes, enabling flexible deployment as an on-grid hybrid system, an IP65 off-grid inverter, or a standalone backup power system
- Comprehensive protections: Over/under voltage protection, overcurrent protection, anti-islanding, thermal management, and surge protection safeguard connected loads and extend equipment life
Applications and Use Cases
The 10000W Onduleur solaire hybrid is well suited to a broad range of applications where dependable power and environmental resilience are critical. Typical deployments include:
- Residential solar-plus-storage systems: Use the hybrid solar inverter 10KW to balance solar generation, household consumption, and battery storage to reduce grid dependence
- Off-grid cabins and rural electrification: The IP65 off-grid inverter enables reliable electrification for remote homes, farms, and community facilities that lack stable grid power
- Commercial and small industrial sites: Small businesses and light industry benefit from the 10000W Onduleur solaire hybrid for energy cost reduction, backup power, and demand-side management
- Telecommunications and critical infrastructure: The single phase solar inverter supports telecom shelters, remote monitoring stations, and emergency systems needing resilient power with IP65 protection
- Mobile and temporary installations: Event sites, construction camps, and temporary facilities gain robust power from the hybrid solar inverter 10KW in diverse environments
Technical Advantages and Innovations
WTHD leverages years of R&D and industry experience to deliver a hybrid solar inverter 10KW that combines innovative control algorithms, robust hardware, and flexible software features. Key technical strengths include:
- Intelligent energy management: The hybrid solar inverter 10KW employs adaptive control logic to manage PV generation, battery state, and load priorities. This reduces battery cycling, improves self-consumption, and ensures reliable backup readiness
- Seamless transition and pure sine wave output: The single phase solar inverter produces high-quality pure sine wave power with fast switchover for backup scenarios, protecting sensitive electronics and industrial controls
- Scalable design: Multiple units of this IP65 off-grid inverter can be paralleled for higher capacity or redundancy, enabling modular expansion to meet growing energy demands
- Robust thermal and power electronics architecture: The 10000W Onduleur solaire hybrid integrates advanced cooling, thermal sensing, and high-reliability power components to maintain efficiency and reduce failure rates under continuous loads
- Flexible communication and monitoring: Integrated RS485, Wi-Fi, or optional cloud connectivity allow remote monitoring, firmware updates, and O&M diagnostics — ideal for installations managed across multiple sites
- Wide input compatibility: The hybrid solar inverter 10KW supports a broad PV voltage range and flexible battery voltages, simplifying system design and permitting use with modern lithium-ion or lead-acid battery banks
Installation, Commissioning, and Maintenance
WTHD designed the IP65 Hybrid Solar Inverter 10KW for straightforward installation and low maintenance. The IP65 off-grid inverter’s sealed enclosure lowers on-site service needs, and plug-and-play wiring for PV, battery, and load connections accelerates commissioning. Integrated software wizards and configuration presets for common system topologies streamline setup for installers. Regular remote diagnostics and modular replaceable parts minimize downtime, while local display and smartphone/cloud interfaces provide intuitive user control and status reporting for the hybrid solar inverter 10KW
Performance and Reliability
WTHD’s 10000W Onduleur solaire hybrid is engineered to meet rigorous quality and safety standards. Backed by ISO9001/14001/45001 compliance and industry certifications, the single phase solar inverter is manufactured using stringent QA processes. Reliable operation under varied environmental conditions is supported by the IP65-rated enclosure, industrial-grade electronics, and comprehensive protection schemes that ensure safe operation and long service intervals
Why Choose WTHD’s Hybrid Solar Inverter 10KW
Selecting the WTHD IP65 Hybrid Solar Inverter 10KW means choosing a proven partner with deep expertise in power systems, energy storage, and mission-critical applications. As a company that integrates R&D, production, and sales, WTHD delivers product reliability, local service, and scalable solutions. The hybrid solar inverter 10KW combines high performance, durable IP65 protection, and flexible single phase solar inverter compatibility to support a wide range of on-grid, off-grid, and hybrid deployments. With optimized MPPT, advanced battery management, and intelligent energy controls, this 10000W Onduleur solaire hybrid is engineered to maximize solar utilization, enhance energy autonomy, and protect critical loads across diverse environments
WTHD’s IP65 Hybrid Solar Inverter 10KW is a comprehensive power solution tailored for modern hybrid and off-grid energy systems. This single phase solar inverter brings together environmental hardening, efficient power conversion, and smart energy management to provide reliable 10000W Onduleur solaire hybrid performance. For integrators, installers, and end-users seeking a robust IP65 off-grid inverter that supports solar, battery, and grid coordination with high efficiency and flexible operation, the hybrid solar inverter 10KW from WTHD represents a high-value, future-ready choice